Required items:
- A brush (you can use an old toothbrush)- Some toothpicksA Q-tips- Soap and warm water- Paper or cloth- Lubricant
Full cleaning process
Step 1
Firstly, you need to open the knife and use the toothpicks for removing the gunk and lint, stuck in its handle. In this step, you need to do it when your knife is dry because the wet dirt could be very hard to get rid off.
Step 2
After finishing the first step, you can move to the sink and wash the knife in warm water, and don’t forget to flush the handle well. Apply soap on the brush, then scrub carefully and thoroughly over the whole knife. Focus on the lock mechanism and try to remove all the sand, dirt, and accumulated crud.
Step 3
If you have a multi knife or Swiss Army knife, you have to start scrubbing by opening the tool. Scrub it one by one; after that, close it. You have to take time for cleaning all parts individually. Open all of them and scrub even the inside part. Then you use the Q tips for cleaning out the inside part and all corners. Now, rinse it thoroughly and dry carefully with a paper towel.
Step 4
Let your good pocket knife fully air dry. If you have any problem with your knife when it is under warranty, the company can fit a sharpened the blade professionally.
Step 5
After your knife gets dry totally, you need to lubricate a moving part, blade and the pivot properly. I usually use petroleum, but you can use sewing machine oil or gun oil. It is better to use mineral oil, although you can use vegetable oil as well.
Step 6
You have to apply the lubricant well. You can use a paper towel for wiping the excess oil from the surface of knife parts. It is better to wipe down the blade, handle, and tool to avoid rusting. Even if your knife is made from stain-resistant steel, it still can get rusted.Don’t forget wiping down the handle with oil if you have a wooden-handled knife.
Cleaning your knife may be cumbersome, but it is very essential. If you take care of your knife well, it makes sure all functions of the knife work correctly. Besides, it also provides extra safety for users.
How to deal with rust?
If your knife gets rusted, you have to decide its situation and how much you need to pay for fixing it. If the rust is a thin layer on the surface, you can remove it quickly. There are some products for removing rust. Buy it and spread it evenly on the blade and rub it in it well. Then wash your knife, dry it, and then you can use it immediately. To tackle that lousy rust, you need to be more patient and give it some time, or you can ask for help from professionals.
Your knife might not be one of the world best pocket knives, but let become the Best Quality Pocket Knives, the most efficient and cleanest knife in the world!
Source: https://droidsans.com/user/keithmay/
Find More Information:
