How to put in your contact lenses is a question that is asked often. The best way to put your contact lenses in is to first wash your hands and then rinse them under cool, clean water. Once your hands are clean and rinsed, then you can use a small amount of saline solution and rub it around the eyes for about 20 seconds. Now that your eyes are moist, take out the contact lens case and open it. Take the lens out of the case and place it on the back of your hand. With the other hand, hold up the lens so that it is not touching anything. Gently move the lens around on your hand until it feels like it is sitting in place. Then gently lower the lens onto your eye. If you see any bubbles in your eye or if there is a lot of excess saline solution, wait for the solution to dry before you continue putting in your contacts.Putting in your contact lenses can be easy with a few easy steps. First, make sure your hands are clean by washing them with soap and water. Next, put your contact lens case on your finger and pull out the lens from the case. Now you should have a lens on your index finger and a lens on your middle finger. Gently place the lens on the top of your eye with the index finger and then slide it down to the bottom of the eye. The other lens will automatically slide into place.