How to Ready Your Vehicle for the MOT Test: A Quick Pre-Check Guide

As a car owner, you need to complete your MOT test every year. But there are some factors that you can easily pass in the MOT test. We understand the different types of points which help in the MOT test. We see some pre-checks which help in the MOT test. Lastly, see the different points of car servicing which help in the MOT tests.  

An MOT is an annual test which can be done after the completion of the third year of vehicle registration. It helps to ensure that the safety, conditions and roadworthiness of the vehicle. It was started in 1962 by the Ministry of Transportation of the United Kingdom. It was started to ensure the condition and roadworthiness of the vehicle. Initially, when it was started, there were three components which were checked in these tests, including tyres, braking system and steering wheel. But, after some time, they want to expand some of the components to improve the safety and roadworthiness of the vehicle. At the current time, there are more than 20 components which are checked in these MOT Aberdeen. These components are categorised into nine different categories, including tyres and wheels, braking system, fluids, suspension and steering wheel, light, indicators and batteries, visibility and all other components which are checked in these tests.  

****  

What are the prechecks required before MOT tests? 

Several pre-checks can help you during the MOT test. We observe the various components that primarily fail in the MOT tests. These components are:-  

Check the light, indicator, and battery; you need to inspect all the vehicle's lights and indicators. Check all the lights, including the rear, front, brake, hazard, number plate, and all other types of lights in your vehicle.  You need to check the vehicle's functionality and efficiency. You also need to check the battery elements like their voltage, electric current and the transmission of the electric current checks for all leakage and current transmission in different components. 

Braking system: You need to check all the conditions and efficiency of the brake, including the brake pad, hammer, disc, and fluid level of the brake. Check all the brakes which are available in the vehicle, including ABS, EPB, handbrake and other types of brakes.  

Tyres and wheel:- you need to check your tyre conditions, like air pressure, cuts, cracks, bulges and other types of defects which occur on your tyres. You can check the tread depth of your car tyres. Check that your tread level is above 1.6m, which is the standard depth of the MOT test, and check your wheel alignment and balancing.  

Exhaust and Fuel System: You also need to check your vehicle's exhaust and fuel system, inspecting the condition of the exhaust system for any leaks, cracks, or defects. Check the level of the smoke and the loud noise. You should also check your fuel system, including the fuel tank, transmission pipes, and leakage from different components. 

Fluid top-up:- top up your different components that use these fluids to improve the performance of your vehicle, including suspension, engine oil and brake fluid.Before going to the MOT test. You need to check your fluid level in your vehicle. 

Visibility:- visibility means that components which are shown on the driver seat, including the windscreen wiper, windshield glass, bonnet, steering wheel, mirrors and all the other components which are seen from the driver's seat.  

Number plate: You must clean your number plate. Because the examiner checks your number plate during VIN checks.  

What are the different benefits of car servicing before MOT tests?  

The benefits of car servicing before the MOT test are as follows:-  

Early detection of issues: If you have had your Car Servicing Aberdeen before the MOT test, it helps to identify all potential issues, which allows for earlier detection and prevention of minor problems from becoming major issues. When you know the exact issues of the vehicle you are repairing, you can address them earlier, which helps you pass your exam easily. 

Increase the chance of passing the MOT test: It helps increase the likelihood of passing the MOT test on the first attempt. During car servicing, technicians inspect various components, which are also checked during these tests, including the tyres, brake system, and all other elements.  

Improve performance: it helps to enhance the overall performance of the vehicle, including the fuel efficiency, braking system, and all other components. It also helps to improve safety.  

Resale value:- It helps to maintain the resale value of your vehicle. When you do your car service in a timely manner, it helps to maintain the resale value of your vehicle.  

Conclusion:- In this blog, we see all about the MOT test and see the different components which are checked in the MOT test, including tyres, braking system, horn, seatbelt, exhaust and fuel system,  suspension and steering wheel. We also see the different benefits of the car servicing before the MOT test, including increased performance, enhanced safety, early detection of issues, and increased chances of passing the MOT test.