How to Clean and Maintain Your Water Dispenser Properly?

Water dispensers are among the most hassle-free house and office appliances available these days. Whether you need cold, hot or room temperature water, this smart device makes it easy to have clean drinking water available every time. Due to the increasing environmental pollution and contamination, the demand for efficient and effective water dispensers has also risen This has propelled RO purifiers to the forefront of homes and businesses, serving a central role in ensuring access to safe drinking water.

However, daily use without regular maintenance can lead to the development of bacteria, mould and mineral deposits, which might impact water quality and machine life.

Be it a basic bottle-type water dispenser or a high-end RO purifier, periodic cleaning and maintenance are necessary to ensure the water becomes fresh, safe and healthy for drinking.

Why cleaning your water dispenser is important?

Many people think that since a water dispenser deals with purified water, it does not become dirty. But that’s not true. With time, water residue can build up and become a breeding ground for bacteria, particularly in hot or humid environments. Parts such as spigots, drip trays, reservoirs and internal filters of an RO purifier are mainly susceptible.

• Cleaning your water dispenser
• Prevents contamination and unpleasant odours
• Sustains water quality and flavour
• Improves appliance efficiency  
• Extends the lifespan of the unit 

How often should you clean your water dispenser?

It is advisable to clean your water dispenser for 1 to 3 months based on usage. If you see any mould indications, bad odour or water taste changes, clean it right away. For RO purifiers, follow the manufacturer's instructions, but a complete service every 6-12 months is ideal. 

A step-by-step guide to cleaning a water dispenser 

• Unplug and Disassemble- Safety first. Turn off the water dispenser and unplug it before cleaning. If it’s a bottled dispenser, remove the water bottle. Remove the drip tray, detachable spouts (if removable) and other parts.
• Clean removable part- Soak removable parts in hot soapy water. You can add a small amount of vinegar for additional disinfecting power. Scrub off grime using a brush, especially around tight corners and crevices.
• Sanitize the reservoir- Clean the reservoir with a sanitizing solution. You can use: 1 tablespoon of unscented bleach per 1 gallon of water, or 1 part white vinegar to 3 parts water. Let it stand for 10-15 minutes. Swirl the solution around to cover all interior surfaces. Then, drain through the spigots so the taps get cleaned as well.
• Rinse thoroughly- Following sanitizing, rinse thoroughly with clean water at least 2-3 times through the reservoir and spigots. This is a crucial step in getting rid of residue from the cleaning solution.
• Wipe down the exterior- Wipe down the exterior of the water dispenser using a damp cloth. Pay special attention to the buttons, display panel and tough area.
• Clean the drip tray- The drip tray is where overflow goes and tends to get forgotten. Wash the drip tray with soap and warm water and allow it to dry thoroughly before reinstalling.
• Reassemble and plugin- After everything is cleaned and dried, reassemble your water dispenser and plugin. Install a freshwater bottle or reconnect the inlet, if it’s connected to a direct source or RO purifier. 

Additional tips for RO water purifier maintenance 

If the water dispenser is part of an RO purifier system, follow these additional steps for maintenance -

• Replace filters regularly- Most RO purifiers should be replaced every 6-12 months. The pre-filter, post-filter and RO membranes all have different lifespans- refer to the user manual.
• Sanitize the system- Like the water dispenser, the RO purifier reservoir and tubes should be flushed regularly.
• Monitor water pressure- Low water pressure may impact performance. Check for proper plumbing and filter to ensure optimum flow.
• Check for leakages- Regularly check the hoses, connectors, and joints for any indication of leaks.
• Professional servicing- Have an annual professional checkup to make sure the system is running efficiently and to detect any problems early. 

Say goodbye to maintenance hassle with the Kent RO Purifier! 

With its path-breaking mineral ROTM technology and RO+UV+UF+UV LED multiple purification process in the storage tank, digital display of purity and mineral features for real-time monitoring of purified water quality, the life of filter, RO flow rate etc Kent RO purifier provides pure and healthier drinking water.

Kent provides cutting-edge UV water purifiers with water storage. The Kent RO purifiers have UV followed by UF membrane to sterilize water, making it a cyst, viruses and bacteria-free.

Kent offers an annual maintenance contract (AMC) which is a hassle-free and convenient method of maintaining the RO water purifier. KENT is known for offering top-notch after-sales services at the customer’s convenience.

You can easily reach out to them by phone, chat, email or mobile app. 

Conclusion

Taking proper maintenance of a water dispenser or RO purifier is essential for a family’s health and hygiene. Regular maintenance of these appliances ensures your family has access to good-quality drinking water. By using these simple steps and making a basic routine, your water dispenser and RO purifier will provide safe, clean and fresh drinking water for several years.

Remember, your water dispenser will give optimal performance, only when you follow maintenance tips and ensure timely maintenance.